Tool Steel, Bars

Steel grade: 1.2080 (X12Cr12) 1.2379 (X153CrMoV12/X153CrVMo12-1) acc. DIN EN ISO 4957

Product range:

Polished bars:

  • diameter Ø 5,0 - 32,0 mm
  • length 2,0 – 4,0 m
  • roughness Ra ≤ 2.5 mkm

Hot-rolled bars, turned:

  • diameter Ø 15 - 95 mm
  • length 3,0 – 5,0 м
  • roughness Rz ≤ 40 mkm

Forged bars, turned:

  • diameter Ø 100 - 450 mm
  • length 2,5 – 5,0 m
  • roughness Rz ≤ 80 mkm.

Diameter deviation for all bars is allowable only in positive tolerance limits.

Chemical composition, deviation of chemical composition and other technical requirements are under DIN EN ISO 4957 and special requirements agreed by a buyer and the seller.

The bars are delivered annealed.

Nonmetallic inclusions content is under DIN 50602, K4 =<50 method.

All bars are tested with respect to grade conformity based on seller’s methods and are subject to an ultrasonic inspection.

Ultrasonic inspection:

100% of bars with diameter up to 100 mm under SEP 1920 class C/c, over 100 mm and up to 300 mm under SEP 1921 class D/d and over 300 mm under SEP 1921 class C/c.

  • Hits: 7146

Акционерное общество «Металлургический завод «Электросталь»
Адрес: 144002, Россия, Московская обл.,
г. Электросталь, ул. Железнодорожная, д. 1
Телефон: +7(496) 577-12-52
Факс: +7(496) 577-02-80
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

AG "Metallurgisches Werk "Elektrostal"
Zheleznodoroznaja Str.1 Electrostal, Moskauer Gebiet, Russland, 144002
Tel: +7(496) 577-12-52
Fax: +7(496) 577-02-80
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Metallurgical Plant “Electrostal” JSC
Zheleznodorozhnaya, 1, Electrostal city, Moscow region, Russia, 144002
Tel: +7(496) 577-12-52
Fax: +7(496) 577-02-80
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Copyright © 2015-2024