Products

Products

Metallurgical Plant Electrostal, JSC has been a key player of the Russian market in production of high-alloyed steels and alloys for many years. High-alloyed steels and alloys are widely used in motor-building, power-engineering, aircraft and aerospace industries.

The company is looking forward to mutually advantageous cooperation with our potential partners. We offer you the range of steels and alloys listed below under customer-oriented requirements:

  1. Heat-Resistant Alloys:
    • Inconel 625 (2.4856)
    • Inconel 718 (2.4668)
    • Inconel 617 (2.4663)
    • Inco Allox C276 (1.4819)
    • Inconel 600 (2.4816)
    • Inconel 601 (2.4851)
    • Inconel 751
    • Incoloy 800 (1.4876)
    • Incoloy 825
    • Nimonic 80A (2.4952) etc.
  2. Stainless steel:
    1.4021, 1.4025, 1.4028, 1.4034, 1.4301, 1.4401, 1.4828 (Aisi 309), 1.4821 (Aisi 310, Aisi 314), 1.4550 (Aisi 347), 1.4542 (17-4PH)1.4545 (15-5PH), 1.4548, including valve steel such as 1.4718 and 1.4871 etc.

Metallurgical Plant Electrostal, JSC offers the following rolled products:

  1. Hot-rolled bars, 8-96 mm dia.
  2. Forged bars, 100-350 mm dia.
  3. Disks, 800 mm dia.
  4. Bars with special surface finish (grinded), 3,0-30 mm dia.
  5. Calibrated bars, 7-30 mm dia.
  6. Cold-drawn wire, 0,02-6,5 mm dia.
  7. Cold-rolled strip, 0,05-2,5 mm thickness, 200-280 mm width.

Modern finishing equipment gives us an opportunity to make surface treatment of bars, 60-200 mm in diameter, with high accuracy (h11) and surface roughness (Ra≤5 mkm).

Our company produces wide range of high-speed steel:

1.3202, 1.3243, 1.3343, 1.3344, 1.3355, 1.3392, М2, М4, Т1 etc.,
as well as tool steel:
1.2080, 1.2210, 1.2343, 1.2344, 1.2363, 1.2365, 1.2367, 1.2379, 1.2436, 1.2510, 1.2714, 1.2764, 1.2767, 1.2842 (А2, D2, H11, H13, S5, S7, O1) and similar items.

A unique combination of equipment, modern research and development department and high-qualified staff makes it possible for Metallurgical Plant Electrostal, JSC to offer its customers steel products manufactured under their requirements and specifications.

You are welcome to send your inquiries to: +7 (496) 577-13-42, 572-91-40, 577-02-49 or to: This email address is being protected from spambots. You need JavaScript enabled to view it.This email address is being protected from spambots. You need JavaScript enabled to view it..

  • Created on .
  • Hits: 8723

Inconel 718 (2.4668)

Inconel 718 alloy bars (2.4668) AMS 5662

Product range:

Polished bars:

  • diameter Ø 20 - 32,0 mm
  • length 2,0 – 4,0 m
  • roughness Ra ≤ 2.5 mkm
  • quality grade h9, h10 (k9, k10)

Hot-rolled bars, turned:

  • diameter Ø 20 - 55 mm
  • length 3,0 – 5,0 м
  • roughness Rz ≤ 40 mkm

Forged bars, turned:

  • diameter Ø 60 - 275 mm
  • length 2,5 – 5,0 m
  • roughness Rz ≤ 80 mkm.

The bars are delivered after solid solution treatment followed by mechanical treatment.

Chemical composition, deviation of chemical composition, shape and dimensions, mechanical properties, grain sizes are under AMS 5662 and/or special requirements agreed by a buyer and the seller.

Ultrasonic control is under SEP 1920 class C/c for bars with diameter up to 100 mm and under SEP 1921 class D/d for bars with diameter over 100 mm

Quality certificate is according to the requirements of EN 10204 3.1B and ASTM 5662.

  • Created on .
  • Hits: 2551

Nimonic 80A (2.4952)

Nimonic 80A (2.4952), Bars

Product range:

Polished bars:

  • diameter Ø 5,0 - 32,0 mm
  • length 2,0 – 4,0 m
  • roughness Ra ≤ 2.5 mkm
  • quality grade h9, h10 (k9, k10)

Hot-rolled bars, turned:

  • diameter Ø 12 - 55 mm
  • length 2,5 – 4,0 м
  • roughness Rz ≤ 40 mkm

Forged bars, turned:

  • diameter Ø 60 - 250 mm
  • length 2,0 – 4,0 m
  • roughness Rz ≤ 80 mkm.

Chemical composition, deviation of chemical composition, shape and dimensions, mechanical properties and other technical requirements are under DIN EN 10302-2008 and/or special requirements agreed by a buyer and the seller.

The bars are delivered after solid solution treatment.

Where necessary controls of nonmetallic inclusion content and austenite grain are carried out under ASTM E45 and ASTM E112 respectively.

Ultrasonic control is under SEP 1920 class C/c for bars with diameter up to 100 mm and under SEP 1921 class D/d for bars with diameter over 100 mm

Quality certificate is according to the requirements of EN 10204 3.1B and ASTM B348.

  • Created on .
  • Hits: 2202

1.4542 (17-4PH)

Bars, 17-4РН (1.4542), AMS 5643

Product range:

Polished bars:

  • diameter Ø 5,0 - 32,0 mm
  • length 2,0 – 4,0 m
  • roughness Ra ≤ 2.5 mkm
  • quality grade h9, h10 (k9, k10)

Hot-rolled bars, turned:

  • diameter Ø 15 - 95 mm
  • length 3,0 – 5,0 м
  • roughness Rz ≤ 40 mkm

Forged bars, turned:

  • diameter Ø 100 - 350 mm
  • length 2,5 – 5,0 m
  • roughness Rz ≤ 80 mkm.

The bars are delivered after solid solution treatment followed by mechanical treatment.

Chemical composition, deviation of chemical composition, shape and dimensions, mechanical properties, ferritic phase content and other requirements are under AMS 5643.

Nonmetallic inclusions content is under DIN 50602, K1 ≤ 15 method.

The bars can be manufactured under special requirements agreed by a buyer and the seller.

Ultrasonic control is under AMS SТD 2154, class A or under SEP 1920 class C/c for bars with diameter up to 100 mm, SEP 1921 class D/d for diameter from 100 mm to 300 mm and SEP 1921 class C/c for diameter over 300 mm.

Quality certificate is according to the requirements of EN 10204 3.1B and AMS 5643.

  • Created on .
  • Hits: 2242

1.4545 (15-5PH)

15-5РН (1.4545), Bars, AMS 5659

Product range:

Polished bars:

  • diameter Ø 5,0 - 32,0 mm
  • length 2,0 – 4,0 m
  • roughness Ra ≤ 2.5 mkm
  • quality grade h9, h10 (k9, k10)

Hot-rolled bars, turned:

  • diameter Ø 15 - 95 mm
  • length 3,0 – 5,0 м
  • roughness Rz ≤ 40 mkm

Forged bars, turned:

  • diameter Ø 100 - 350 mm
  • length 2,5 – 5,0 m
  • roughness Rz ≤ 80 mkm.

The bars are delivered after solid solution treatment followed by mechanical treatment.

Chemical composition, deviation of chemical composition, shape and dimensions, mechanical properties, ferritic phase content and other requirements are under AMS 5659.

Nonmetallic inclusions content is under DIN 50602, method K1 ≤ 15

The bars can be manufactured under special requirements agreed by a buyer and the seller.

Ultrasonic control is under AMS SТD 2154, class A or under SEP 1920 class C/c for bars with diameter up to 100 mm, SEP 1921 class D/d for bars with diameter from 100 mm to 300 mm and SEP 1921 class C/c for bars with diameter over 300 mm.

Quality certificate is according to the requirements of EN 10204 3.1B and AMS 5659.

  • Created on .
  • Hits: 2129

Акционерное общество «Металлургический завод «Электросталь»
Адрес: Россия, 144002, г. Электросталь, Московская обл., ул. Железнодорожная, 1
Телефон: +7(496) 577-12-52
Факс: +7(496) 577-02-80
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Copyright © 2015-2017 АО "Металлургический завод "Электросталь"