Products

Products

You are welcome to send your inquiries to:
Tel.: +7 (496) 577-14-13,
Fax: +7 (496) 577-11-89
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Created on .
  • Hits: 28478

Inconel 718 (2.4668)

Inconel 718 alloy bars (2.4668) AMS 5662

Product range:

Polished bars:

  • diameter Ø 20 - 32,0 mm
  • length 2,0 – 4,0 m
  • roughness Ra ≤ 2.5 mkm
  • quality grade h9, h10 (k9, k10)

Hot-rolled bars, turned:

  • diameter Ø 20 - 55 mm
  • length 3,0 – 5,0 м
  • roughness Rz ≤ 40 mkm

Forged bars, turned:

  • diameter Ø 60 - 275 mm
  • length 2,5 – 5,0 m
  • roughness Rz ≤ 80 mkm.

The bars are delivered after solid solution treatment followed by mechanical treatment.

Chemical composition, deviation of chemical composition, shape and dimensions, mechanical properties, grain sizes are under AMS 5662 and/or special requirements agreed by a buyer and the seller.

Ultrasonic control is under SEP 1920 class C/c for bars with diameter up to 100 mm and under SEP 1921 class D/d for bars with diameter over 100 mm

Quality certificate is according to the requirements of EN 10204 3.1B and ASTM 5662.

  • Created on .
  • Hits: 7633

Nimonic 80A (2.4952)

Nimonic 80A (2.4952), Bars

Product range:

Polished bars:

  • diameter Ø 5,0 - 32,0 mm
  • length 2,0 – 4,0 m
  • roughness Ra ≤ 2.5 mkm
  • quality grade h9, h10 (k9, k10)

Hot-rolled bars, turned:

  • diameter Ø 12 - 55 mm
  • length 2,5 – 4,0 м
  • roughness Rz ≤ 40 mkm

Forged bars, turned:

  • diameter Ø 60 - 250 mm
  • length 2,0 – 4,0 m
  • roughness Rz ≤ 80 mkm.

Chemical composition, deviation of chemical composition, shape and dimensions, mechanical properties and other technical requirements are under DIN EN 10302-2008 and/or special requirements agreed by a buyer and the seller.

The bars are delivered after solid solution treatment.

Where necessary controls of nonmetallic inclusion content and austenite grain are carried out under ASTM E45 and ASTM E112 respectively.

Ultrasonic control is under SEP 1920 class C/c for bars with diameter up to 100 mm and under SEP 1921 class D/d for bars with diameter over 100 mm

Quality certificate is according to the requirements of EN 10204 3.1B and ASTM B348.

  • Created on .
  • Hits: 6764

1.4542 (17-4PH)

Bars, 17-4РН (1.4542), AMS 5643

Product range:

Polished bars:

  • diameter Ø 5,0 - 32,0 mm
  • length 2,0 – 4,0 m
  • roughness Ra ≤ 2.5 mkm
  • quality grade h9, h10 (k9, k10)

Hot-rolled bars, turned:

  • diameter Ø 15 - 95 mm
  • length 3,0 – 5,0 м
  • roughness Rz ≤ 40 mkm

Forged bars, turned:

  • diameter Ø 100 - 350 mm
  • length 2,5 – 5,0 m
  • roughness Rz ≤ 80 mkm.

The bars are delivered after solid solution treatment followed by mechanical treatment.

Chemical composition, deviation of chemical composition, shape and dimensions, mechanical properties, ferritic phase content and other requirements are under AMS 5643.

Nonmetallic inclusions content is under DIN 50602, K1 ≤ 15 method.

The bars can be manufactured under special requirements agreed by a buyer and the seller.

Ultrasonic control is under AMS SТD 2154, class A or under SEP 1920 class C/c for bars with diameter up to 100 mm, SEP 1921 class D/d for diameter from 100 mm to 300 mm and SEP 1921 class C/c for diameter over 300 mm.

Quality certificate is according to the requirements of EN 10204 3.1B and AMS 5643.

  • Created on .
  • Hits: 6642

1.4545 (15-5PH)

15-5РН (1.4545), Bars, AMS 5659

Product range:

Polished bars:

  • diameter Ø 5,0 - 32,0 mm
  • length 2,0 – 4,0 m
  • roughness Ra ≤ 2.5 mkm
  • quality grade h9, h10 (k9, k10)

Hot-rolled bars, turned:

  • diameter Ø 15 - 95 mm
  • length 3,0 – 5,0 м
  • roughness Rz ≤ 40 mkm

Forged bars, turned:

  • diameter Ø 100 - 350 mm
  • length 2,5 – 5,0 m
  • roughness Rz ≤ 80 mkm.

The bars are delivered after solid solution treatment followed by mechanical treatment.

Chemical composition, deviation of chemical composition, shape and dimensions, mechanical properties, ferritic phase content and other requirements are under AMS 5659.

Nonmetallic inclusions content is under DIN 50602, method K1 ≤ 15

The bars can be manufactured under special requirements agreed by a buyer and the seller.

Ultrasonic control is under AMS SТD 2154, class A or under SEP 1920 class C/c for bars with diameter up to 100 mm, SEP 1921 class D/d for bars with diameter from 100 mm to 300 mm and SEP 1921 class C/c for bars with diameter over 300 mm.

Quality certificate is according to the requirements of EN 10204 3.1B and AMS 5659.

  • Created on .
  • Hits: 6141

Акционерное общество «Металлургический завод «Электросталь»
Адрес: 144002, Россия, Московская обл.,
г. Электросталь, ул. Железнодорожная, д. 1
Телефон: +7(496) 577-12-52
Факс: +7(496) 577-02-80
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

AG "Metallurgisches Werk "Elektrostal"
Zheleznodoroznaja Str.1 Electrostal, Moskauer Gebiet, Russland, 144002
Tel: +7(496) 577-12-52
Fax: +7(496) 577-02-80
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Metallurgical Plant “Electrostal” JSC
Zheleznodorozhnaya, 1, Electrostal city, Moscow region, Russia, 144002
Tel: +7(496) 577-12-52
Fax: +7(496) 577-02-80
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Copyright © 2015-2024